Westinghouse Generators and Pressure Washers

Westinghouse Generators & Some of the Lineup of Generators and Power Washers

In 1886, George Westinghouse founded Westinghouse Electric Company and built the initial AC power generating plant in Great Barrington, Massachusetts. The business’s founder already had exposure to a different type of power: he patented the rotary steam engine in 1865. Ever since then, the Westinghouse company has built numerous products from jet engines to light bulbs. Two current goods that bring out send out plant’s roots are the portable generator as well as the power washer.

Portable Generators

Westinghouse manufactures portable generators rated from 3250 watts through 7000 watts, providing reliable power on the job or at home, for everyday use as well as to supply power during an outage. Each of the units operate on regular, unleaded gasoline. The engines are protected with automatic shutdown for low oil conditions. Each of the portable generators have Westinghouse’s unique VR voltage regulation system for clean, quality power well suited for most electronics.
Each of the portable generators have a user interface which includes four, 20-ampere 120-volt outlets along with a single 30 ampere 120/240-volt twist-lock outlet. Some models have an included cord to connect the 120/240-volt outlet with an inlet box or power distribution panel. All outlets are protected by circuit breakers and neutral to ground bonding. A connection to earth ground is required.
Additional features include quiet operation together with the Westinghouse Pulse-Flo Muffler system for one of several lowest noise levels in its class. Each unit ships with oil, funnel, along with a tool kit for convenient assembly and startup right out of the box. Units equipped with electric start will include a starter battery.
The generators run for 11 to 14 hours at half load, with regards to the size of the generator. Fuel consumption by portable electric generators varies together with the electrical load and the size of the engine.

  • WH3250 – 3250 continuous watts – 3750 surge watts – 14 hour 1/2 load run time – Manual start.
  • WH5500 – 5500 continuous watts – 6750 surge watts – 14 hour 1/2 load run time – Manual start.
  • WH6000S – 6000 continuous watts – 7500 surge watts – 13 hour 1/2 load run time – Electric start – Includes 30-Ampere Power Cord.
  • WH6500E – 6500 continuous watts – 8000 surge watts – 13 hour 1/2 load run time – Electric start.
  • WH7000E – 7000 continuous watts – 8500 surge watts – 11 hour 1/2 load run time – Electric start. WH7000EC is CARB certified for California sale.
  • WH7500E – 7500 continuous watts – 9000 surge watts – 11 hour 1/2 load run time – Electric start.

Power Washers

Westinghouse builds six gasoline-engine-powered power washers with ratings from 2300 to 3000 PSI. All purchases you can use use right out of the box, and includes a high-pressure hose and wand, quick-connect nozzles, engine oil, and detergent/chemical siphon hose. Four standard nozzles include soap dispensing, zero, 25, and 45 degree for various cleaning purposes. Each of the models are installed on carts for easy positioning.
The WP 2300 and WP 2500 include a lightweight gun and wand. Other models have a stainless steel wand with ergonomic gun.
Westinghouse warrants their power washers for 3 years.
WP2300 – 2300 PSI – 2.3 Gallons Each Minute (GPM) – 5290 Cleaning Units (CU). EPA and CARB certified emissions for sale in all 50 states.
WP2500 – 2500 PSI – 2.3 GPM – 5750 CU – EPA and CARB certified for sale in all 50 states.
WP2700 – 2700 PSI – 2.2 GPM – 5940 CU – EPA certified for sale in 49 states.  Includes 15 degree nozzle and 30-foot hose.
WP2800 – 2800 PSI – 2.4 GPM – 6720 CU – EPA and CARB certified for sale in all 50 states. Includes 15 degree nozzle and 30-foot hose.
WP3000 – 3000 PSI – 2.4 GPM – 7200 CU – EPA and CARB certified for sale in all 50 states. Includes 15 degree nozzle and 30-foot hose.
WP3000 – 3000 PSI – 2.8 GPM – 8400 CU – EPA and CARB certified for sale in all 50 states. Includes 15 degree nozzle and 30-foot hose.

For more info go to: www.GeneratorPowerforLess.com

20kW Standby Generator Comparison

20kw Standby Generator Comparison

Standby generators supply backup power in an outage, whether for some hours or perhaps a couple of weeks after having a major storm like Hurricane Sandy. Manufacturers including 20kW standby generators by how much continuous power they could provide, and not all generator ratings are equal. Briggs & Stratton, Generac, and Cummins Onan all offer standby generators that run on either LP or gas main, but only give you a full 20kW of power while running on LP. The generators are derated while operating on gas main and will only provide up 18kW of continuous power.

Kohler generators are designed to run on either LP or NG, plus they give you the rated power to the generator. A 20kW NG standby unit will provide 20,000 watts of power, identical to the similar model that is run on LP gas.

Reserve power isn’t advertised by standby generator manufacturers, but generators can provide another boost of power for some seconds to get started on large, durable motors.

Remote Options

Generac uses the cellular phone texting system using their Mobile Link offering to supply status and maintenance updates for his or her 20kW generator on any text-message-capable mobile phone. Mobile Link also provides web access through the computer, tablet, or cell phone that also includes programming exercise periods or scheduling maintenance.

Cummins Onan can email updates, send maintenance requests to technicians, and allow viewing generator status from the net.

Kohler Power Systems gets the On Cue Home Generator Power Management System, that enables homeowners to watch real-time 20kW standby generator status, view and reset diagnostic codes, check status messages, and view multiple generators about the same screen.


All the 20kW generator manufacturers offer warranties applicable to standby power applications where a utility supply is connected. Off-grid systems not connected to the utility supply are not covered with the standard consumer warranties.

Kohler’s consumer warranty is 5 years or 2000 hours. In a few off-grid applications being a standby unit, they provide an 18 month/1000 hour warranty. Labor is only covered throughout the first couple of years after installation.

Generac also provides a 5 year consumer warranty with complete coverage for your first couple of years, coverage only on parts in year three, and limited coverage on the alternator and engine in years four and five.


14kw Standby Generator Comparison

14kw Standby Generator Comparison

In the event the utility power goes out, standby generators supply backup emergency power through the power outage. Whether a major hurricane or perhaps a fast-moving local thunderstorm, power outages can last a few hours, a week, or providing monthly or more. Using a availability of standby power coming from a home generator, residents can remain inside their homes rather than seeking shelter elsewhere.

Home standby generators operate automatically and therefore are permanently coupled to the home’s electrical system via an automatic transfer switch which is usually offered by the generator’s manufacturer. The switch and generator controller work together. In the event the power goes out, the generator starts as the transfer switch connects the property to the generator and disconnects it through the utility company. After utility power is restored, the connections are reversed and the generator shuts down.

Standard Features

Most 14kW standby generator manufacturers offer similar features and own brand of extra functionality. The engines possess a fully pressurized lubrication system comparable to that in cars and definately will de-activate for low oil pressure or high engine temperature. Each will run the generator by taking exercise cycles to keep the generator lubricated preventing seals from drying out. After operating under load, they run for a short, no-load cool-down period.

Utility power is mostly clean and also totally free of excessive noise. The AC frequency is steady and unvarying, and the voltage stays within a certain range, rarely falling below 108 volts and never exceeding 125 volts. Standby 14kW generators meet and frequently exceed precisely the same requirements and provide utility-quality power, even if the loads change frequently or while starting large, heavy-duty motors.

Continuous Power

Standby generators are rated by how much continuous power they can supply, but not all give you the rated continuous turn on all fuels. Kohler Power Systems and Generac Power Systems are two manufactures of 14-kilowatt standby generators that are powered by LP or propane.

Some manufacturers derate their multi-fuel generators when operating on propane because propane contains about 10 % less energy than propane. An electric which will be powered by propane will likely run just fine on gas with a few adjustments, but because the gas has less energy, the engine cannot release precisely the same power.

Remote Operation

Generac offers Mobil Link as an optional accessory. It uses the cellular text messaging system to communicate with an online-based dashboard that owners have access to everywhere with a web connection, bringing the Generac14kW standby generator controller to tcomputers around the globe. Status sms are sent to cell phone accounts. A digital cell phone connection with texting is required on the 14kW generator installation site.

Kohler’s On Cue Remote Management Systems allows owners to control their 14kW standby generator from around the globe. Status messages can be mailed to dealers, owners, or both to ensure maintenance is conducted as needed and problems managed before they create a generator to fail. Users are able to see real-time status, see and clean fault codes, manage generator performance, and review generator history. It offers for operation of multiple generators collected from one of account. The On-Cue Keeper requires Windows XP, Vista, Windows 7 or Windows 8 and generator net connection.


Kohler covers their 14kW standby generators using a consumer warranty of 5 years or 2000 hours for standby operation when reliable on-grid utility power is available, and includes labor through the first couple of years after installation. For off-grid applications where utility power just isn’t reliable or available, the warranty covers parts for eighteen months or 1000 hours.

Generac’s 14Kw standby generator includes a 5 year, 2000 hour limited consumer warranty for on-grid applications. Off-grid applications have no coverage and definately will void the warranty. Comprehensive parts, labor, and mileage are covered for the first couple of years, parts through the third year, and limited coverage with the engine block and alternator through the fourth and fifth years.

For more info go to: www.NPSGenerac.com

Cummins Onan Cold Weather Package

Cummins Onan Cold Weather Package

Cummins Onan standby generators come in many different packages that include various automatic transfer switches and cold temperatures packages. Standby generators from Cummins Onan operate automatically when the utility power is interrupted and they are attached to an automatic transfer switch.

Winter packages enable the generator engine to start with less effort during cold temperatures, providing more reliable operation under harsh, cold weather conditions.

Cummins Onan Standby Generators

Cummins is really a trusted name in power generation, and standby generators aren’t any exception. Home standby units for emergency power are the 20-kilowatt and 13-kilowatt air-cooled models, along with the 20 kilowatt liquid-cooled machines.

Cummins Power Generation combines their residential standby generators with various automatic transfer switches to offer the demands of most home standby customers with utility-quality power that meets the needs of even the most sensitive of electronics. The generators come with a 5-year, 2000 hour limited consumer warranty.

Winter Equipment

Cummins recommends the addition of cold-weather accessories to use in climates where temperatures drop to zero degrees Fahrenheit or lower.

A breather heater warms the engine breather tube to avoid ice build up during winter. It connects to a cold weather kit (available separately) or into any cold weather equipped generator. The breather heater is suggested for use in environments where temperatures drop below zero.

The battery blanket warmer is really a flexible heater that wraps around the battery to keep it warm when temperatures drop below -10 degrees. A separate 120-volt outlet is required to fire up the heater.

Winter kits include an engine oil heater as well as an alternator dryer. The engine oil heater allows easier starting by continuing to keep the oil warm and fluid, and enables the lubrication system to supply oil faster following your engine starts. Alternator dryers keep frost from accumulating about the alternator.

20-Kilowatt Cold-Weather Packages

Four 20-kilowatt cold temperatures packages combine cold-weather equipped generators with automatic transfer switches. The 20kW standby generator packages will start and manage a 5-ton air conditioner and possess fully automatic power management capability.

The automatic transfer switches are either 100-amp or 200-amp, service-entrance-rated automatic transfer switches that include whole-house-power management capability and 2-amp rechargers, all in the NEMA 3R enclosure rated for outdoor installation. Included as well are an indoor wireless monitor and internet monitoring with email notifications.

The RS20-C150 has the 100-amp ATS, whilst the RS20-C250 has the 200 amp model. These generator packages are US EPA and CARB certified for emissions.

For easy installation, Cummins Onan includes two, 100-foot installation harnesses with all RS20-C1100 and RS20-2100. The C1100 includes the 100-amp transfer switch the C2100 with the 200-amp ATS. US EPA emissions only. Not obtainable in California.

13-Kilowatt Cold-Weather Packages

The 13-kilowatt standby generator packages from Cummins Onan include five different kinds. All include indoor wireless monitors and remote internet monitoring with email updates and therefore are 49 state compliant for US EPA emission standards.

Model 13GSBA-6711A is often a standby generator only equipped for cold temperature operation.

Packages that include the automatic transfer switches would be the RS13-150, RS13-250, RS13-C1100, and RS13-C2100. The transfer switches are service entrance, NEMA 3R rated for outdoor installation and furnished with the two-amp battery charger and whole-house-power management.

The RS13-C150 features a 100-amp switch and includes two, 50-foot wiring harnesses. The RS13-250 includes the 200-amp switch as well as the two 50-foot wiring harnesses.

The RS13-C1100 together with the 100-amp switch along with the RS 13-C2100 with 200-amp switch each come with two, 100-foot wiring harnesses.

For more info go to: www.Got-Generators.com

Be Prepared with a Home Toolkit

Home emergencies can transpire without warning and in most circumstances a rapid call to 911 will bring help quickly. When a widespread catastrophe affects an entire region, emergency response teams will be overcome and you may possibly have to rely on yourself to deal with at least some of the difficulties that may arise.
With an appropriate plan of action, the right tools, and superior preparedness, your home emergency kit should have your back in a time of need. When a big weather event like a hurricane looms overhead, people panic and it doesn’t take much longer for them to use up local supplies such as lumber and foods or emergency equipment.

Electricity powers our world and we don’t think about it very much until we miss it . It retains pumps working, food cold, and furnaces providing heat. When an outage happens, your family will be protected within your residence with a standby or portable generator to retain the power online and keeping you comfy till the power is restored.
A generator takes time install or put together, and attaching it appropriately to your home demands a transfer switch. Have an electrician set up a manual transfer switch for a portable generator or an automatic transfer switch for a standby generator and you’ll be ready to stand up to a power outage in comfort and security.
If you are making use of a portable generator be sure to retain your fuel in a 5 gallon container, rotate it on a regular basis, and use a stabilizer to keep it fresh.

When you are in the middle of an emergency, time is usually of the essence making a tool bag a handy thing to have in particular if you need to leave your home and bring it with you. Make sure you have an arsenal of screwdrivers, wrenches, adjustable wrenches, and an assortment of pliers. Ratcheting screwdriver sets with interchangeable heads are light-weight, tough, and don’t take up a lot of space. Small socket sets, Allen wrenches, a hammer, a hacksaw, and a hatchet are all good tools to have in an emergency. Purchasing and utilizing heavy-duty extension cords makes it easier for you to connect your tools to your generator and also insures safe operation.

Food is an obvious need, but maybe less obvious is water. Make sure that you have water storage containers on hand for the future. Gallon-size containers are not hard to move and fill, larger containers are less portable and harder to fill, but can store a good deal of water for use during a widespread disaster.
To turn a suspect water source into drinkable water, use a chlorine based water purification tablet which will kill bacteria, viruses and parasites to make water safe for drinking. A small camp stove can cook food and boil water to make them safe for consumption. You probably won’t run your electric stove from a generator, but you could power a hotplate, microwave oven, or toaster oven.
Simple supplies such as duct tape, rope, bungee cords, and lumber should not be overlooked as they will most certainly come in handy. Make sure to keep these stocked at all times and at your reach and resupply your kit when your items inside start to get depleted. 

Battery driven lanterns, flashlights, and lights can get you through the night if you don’t have power or need to conserve generator power. Gasoline powered lanterns can provide a bright light, but can also emit dangerous carbon monoxide.
An inverter to link to your car’s battery can supply power for chargers and similar items. Better models with greater wattage can power much more items. The power they supply is usually not the greatest for running larger motors, so don’t rely on them to run refrigerators, freezers, or pumps. You’ll have to run your car’s engine to prevent the battery from running too low, but if it does happen, a battery charger you can plug into your generator will charge it up again, or you could link it to another battery with jumper cables to give your car a boost.
There is more that you need than just your emergency toolkit. Make sure that you have a solid plan and are ready to put it to work, and also, be aware of the most prevalent risks that can be found in the area you live. Formulate your plan around your local dangers and you should be well ready if and when an emergency happens.

For more info go to: www.NPSGenerac.com

Standby Generator Maintenance – Be Prepared For Power Outages

Ever since we as people have depended on machines to do our dirty work, there has always been a call to keep them maintained. A sure fire way to damage your equipment is the lack of maintenance and service interruption. To put it in perspective, normally we are used to tuning up our motor vehicles with frequent checkups, fluids and filters. As usual, parts will lose their integrity over time and fluids will break down and be used up. A part slips some here or wears unevenly there, and soon enough the engine is out of sync. It’s no different for a standby generator. They are powered by internal combustion engines and like cars, they need maintenance. Keep standby generators prepared for power outages by conducting maintenance on schedule. Make sure to look over your owner’s manual and be totally sure that the unit will not start while you are executing your maintenance

Lubrication System

The engine is lubricated by oil. Most standby generators will shut down to avoid damage if there is inadequate oil to lubricate the engine. While the standby generator is in operation it will receive signals to the generators controller if oil pressure is below than the appropriate level. At this time, the controller will deactivate the generator. Every month, be sure to check the level of oil and top up as required. During prolonged operation, check the oil regularly. Change the oil and oil filter as needed by the maintenance schedule―as much as every 100 hours of operation for some standby generators. Always use the correct viscosity oil specified for the temperature range of the generator’s operating environment.

Cooling System

Air-cooled generators have cooling vents that guide air over the engine while it is operating. Keeping these vents clear of any debris or obstruction is most vital to allow the engine to breathe. Be sure that no leaves, grass or any other debris is blocking any cooling vents or air intakes . Make sure that doors, lids, and sides are closed and locked. Examine the cooling system on liquid-cooled generators for correct coolant levels and top off the coolant as necessary. Make sure there are no loose clamps or any leaking hoses. Any parts that have endured obvious damage make sure you replace as soon as possible. Adjust the coolant as necessary according to the maintenance schedule found in the owner’s manual. Examine the fan belt on liquid-cooled standby generators for cracks, wear, and signs of impending failure. Always be sure to replace a belt before it malfunctions and breaks as this can lead to additional damage to the unit.

For more info go to: www.NPSBriggsandStratton

Home Disaster Prevention Tips

Be ready to stop a disaster from happening to your home. Thousands and thousands of homeowners file insurance claims to by some means make back their losses which are caused by disasters every year. In some worst cases, a home disaster disaster can leave a home unlivable or at the least cause severe inconvenience. Some items that may be damaged range from spoiled food and mold infestations inside fridges and freezers. Another service interruption source such as earthquakes, tornadoes, hurricanes, and other storms, make local travel nearly impossible, and can also lead to other concerns such as polluted water supplies.
It is not doable to stop every disaster, but it is possible to decrease the chance of damage and enhance the safety of the house and the people living within it. Take preventative measures ahead of time that help lessen the likelihood of a home disaster and then follow these home disaster prevention recommendations to help keep your home safe and livable.

As acts of terrorism and other disasters such as acts of Mother Nature. Electrical power keeps our houses livable and supplied with water. When the power goes out for any reason, whether for a neighborhood, an entire town, or across several states, everything that depends on electricity shuts down. Any effective disaster prevention plan really should contain a standby or portable generator to supply power during an outage. A standby generator is permanently set up and requires no human intervention to run and keep operating for days at a time. Portable generators can supply energy where you need to have it, when you need it. 

Not all home floods are triggered by overflowing rivers and streams. Being ready well in advance permits you to combat the numerous disasters waiting to happen in and around your home.

  • Before leaving your home for prolonged time periods, don’t forget to turn off your water.
  • Make sure that your washing machine is employing hoses that will not burst.
  • Make sure your fixture connections are using braided steel hoses that include a flood prevention device.
  • Make sure that if you are using a sump pump, that the circuit that it is running on is driven by the home backup generator and inspect and test the pump at least twice a year. Install extended length rain gutter outlets that discharge water downhill and away from the home.

Hot, humid air is the perfect environment for mold growth. Air that does not flow freely magnifies the issue. Today, homes are sealed up tight to help with energy efficiency but in turn this stops air flow. Air conditioners take away humidity from the air and prevent mold growth. On the opposite side of things, during the winter months bursting pipes is an area for concern when temperatures drop. Make sure that the appliances that control the environment of your home such as, furnaces, air conditioner, and dehumidifier are working on the circuits that are being powered by your generator. A refrigerator can keep food cold for about a day without power. A freezer might last two days, or three at the outside, without power. After that, food thaws and spoils rapidly. On the circuit that is powered by your generator, make sure you include your refrigerator and freezer to be sure of continuous operation. 

The trees close to your home should be trimmed so that no branches are touching or overhanging the house. Make sure that trees on your land are not too close as their roots can protrude into sewer lines and weaken your foundation. Your landscape grading on your property should move water away and downhill from your home and doesn’t stand in puddles or ponds. By keeping the siding and roof in good repair, you prevent really serious problems in high winds and heavy rains. Don’t shovel snow up towards the house. Make sure the area you clear the snow into is away from sump pumps or openings to your home in case of unexpected melting, you do not want water overflow. Performing regular upkeep and maintenance on your generator according to its user manual and instructions will assure its safe and smooth operation when it is needed. Remember to maintain and rotate fuel supplies for portable generators to keep the supply fresh. Remember that older fuel may go stale causing problems if you use this fuel in your generator, such as preventing it from running efficiently, or even running at all.

For more info go to: www.BackupHomePower.com

Don’t Go Powerless Again

Each and every year, millions of people experience prolonged power outages. Interruption of utility service is normally brought on by weather events like strong thunderstorms with high winds. Hurricanes, micro-bursts, and tornadoes also harm electric-utility infrastructure. Some power outages are known to last a few hours or even days at a time depending on the severity of the storm. From time to time it can take up to multiple weeks for utility workers to restore power after widespread damage from a serious event. In the meantime, homes are left without the power and they need to remain livable and maintain refrigerators cold and pumps operating.

Power Outage Problems

It is quite possible that the power outage you encounter only spans hours instead of days. When the power went out, you called the electric utility and learned that crews would have power restored the same day. It was inconvenient to live devoid of power for a short time, but consider what was going on in your home at that time. During a heavy rainstorm, houses with basements kept dry by sump pumps can begin to flood in as little as an hour. Without power the temperature of your freezers and refrigerators will raise. Without power, temperature extremes can make a house unlivable in a very brief time. In chilly weather, pipes can freeze without having heat.

Generators Keep The Power On

Standby generators for emergency power and portable generators can keep a home supplied with electricity. With a standby generator, you can set up and without anymore intervention other than some upkeep time to time you can rest assured you are protected. Sensing the power outage automatically, the generator will initiate and detach the house from the utility lines and connect it to the generator instead. Standby generators for home use run on either liquefied petroleum gas (LP Gas or Propane) or natural gas (NG). Using NG or LPG eliminates the need for steady refueling. A portable generator works in a similar fashion, but needs the homeowner to set it up, connect it to the house and get it started, and then throw a manual transfer switch to power up the home. If the home is not outfitted with a manual transfer switch, extension cords join certain appliances directly to the generator. Normally smaller portable generators will run on gasoline there are some alternatives and models that use liquid propane as well. Generators that are marked as tri-fuel can run on all three types, gasoline, LPG, and natural gas.

Portable Vs. Standby

A standby generator is truly a backup power source. It runs and provides power for days without human intervention. If an outage occurs when no one is at your home, the only thing that will be obvious when you come back is the clocks have reset. Any food that was left in any freezers or refrigerators will not be disturbed. In general, portable generators cost less than standby units and the electrical connections to a house are also more economical. Portable generators are also a choice for someone who is wanting a cheaper answer then both a standby generator and transfer switch. Keeping a portable generator for use during a power outage also means keeping fuel on hand and sustaining that fuel supply by adding stabilizers and rotating the stock as it grows old.

Be Ready

Don’t be caught without power during the next big storm. Start planning now and make your decision of a portable or standby backup generator for your home so that when the next power outage hits, you’re not left wondering when the power will come back on, if the food will spoil in the fridge, or if the pipes will freeze from sub-freezing temperatures. Enjoy your comfortable home in peace as others flee to hotels and overseas to escape the heat or cold. guarding your property ahead of time is much cheaper than fixing or changing it.

For more info go to: www.BackupHomePower.com

True Costs Associated With A Home Generator Installation

The expense of any main appliance is the most crucial thing to consider when making a purchase. Fees are typically underestimated for equipment purchases because homeowners fail to look at all the factors concerned with placing the equipment in their homes. Emergency standby generators are no different, and there is more than the purchase of a generator and delivery costs to look at. The true cost a consumer or business will incur to set up an emergency generator depends on the generating unit chosen, the type of automatic transfer switch, local codes and regulations, extra accessories, and installation labor and materials.

Automatic Transfer Switch

The automatic transfer switch selected will factor greatly into the installation labor and material fees. Some automated switches replace the entire main service panel while others install between the main panel and the meter to select between utility power and emergency standby generator power for the entire home. Due to involving changing the homes service equipment, these switches will cost the most tot install. Simpler installations that cost less in terms of equipment, labor, and products connect to the main panel and only power circuits chosen as essential or critical. They connect to a double-pole breaker in the main panel for utility power and to the generator for emergency backup power. The switch distributes power to a sub-panel, or to circuit breakers contained within the switch. When a power outage occurs, they transfer the essential circuit to generator power. In the home the remaining circuits are without power. Variations on both of these options will give you a choice, and inevitable affect your final cost.

Electrical Connections

Just one of the features of connecting a standby generator to a home or business is set up of the automatic transfer switch. Another element you will need to take under consideration is wiring between the transfer switch and the building. It includes controller wiring for communication between the transfer switch and the generator, and feeder lines that carry electricity from the generator to the transfer switch for distribution to the home’s electrical system. Other wiring may incorporate remote, wired controllers set up inside the home and modules for handling 240-volt, high-voltage appliances such as air conditioners, electric dryers, water heaters, and well pumps. Possibly raising the cost of installation, each device is connected to a managed power device each requiring additional wiring.

Fuel Connections

Fuel to run an emergency backup power generator runs through supply lines from the building’s natural gas lines or from an LP gas tank. This will require additional supply lines in either case. A natural gas installation may demand a different meter in order to supply sufficient gas for the backup generator. In liquid propane installations you may possibly demand a new regulator for the same reason.

Budgeting Costs

The ideal way to find the true costs relating to the installation of standby power generators is to check with an installer authorized by the generator manufacturer. They can help you navigate permits and building departments and advise you on the type of installation that best suits your needs and your budget.

For more info go to: www.GeneratorPowerForLess.com

How To Keep Safe With Your Portable Generator

Anywhere electrical power is required such as, construction sites, campgrounds, and houses, a portable power generator will supply it. Not just for convenience, they power tools, health-related gear, and retain important appliances operating. Along with hooking up your generator, and making proper connections. Follow these portable generator safety tips to prevent life-threatening mishaps. For specific safety instructions make sure to read your owner’s manual that is particular to the model of generator you own.

General Safety

When a generator is currently in use, never try to refuel it. Turn the generator off and allow it to cool before adding fuel. Don’t allow children to play near a generator during operation. Burn and electrical hazards can injure a child. Disconnect loads from the generator before you turn it off and keep them disconnected until the generator is running again. Use battery-powered carbon monoxide detectors when the generator is operated near a home or other dwelling. Keep combustible materials away from the generator. Generator exhaust contains carbon monoxide, an odorless, colorless gas that can quickly kill in a confined space. Never place a portable home generator indoors, including the inside of a home, garage or shed, even if the windows and doors are open. Windows and doors cannot provide adequate ventilation for an internal combustion engine regardless of the fuel being used. Keep portable generators at least 10 feet from any dwelling including homes, tents, RVs, and campers. Make sure that your generator is far away from open doors, windows, or vents, as the fumes can seep into where you are residing. Also, be sure to place your generator downwind to avoid fumes entering the dwelling. Also, be mindful of the direction your exhaust may travel, and make sure to be aware of how close your neighbors are in relation to your generator. Always have a level stable surface that will not flood to place your generator on. 

Using Extension Cords

Always use extension cords designed and rated for outdoor usage. Electrical cords would be wise to have a ground wire and also have three-pronged plugs and receptacles. Be sure you obtain cords that may support how much power the devices used will draw. Common wire sizes include 14 gauges for about 15 amperes, 12 gauges for about 20 amperes, and 10 gauges for about 30 amperes. When the cords will carry near their maximum rated load greater than eighty percent of that time period, boost to another (smaller gauge number) size cord. Electrical cords more than 100 feet require larger wires (smaller gauge number) to reduce voltage drop, which may cause motors to overheat or burn up. Usually do not pinch extension cords in windows or doors, or use cords when they’re coiled up. Pinched wires can quickly overheat and initiate a hearth. Uncoil cords before you make connections to ensure that they’re from overheating. Exclusively use extension cords in good with unbroken sheathing and solid connections to plugs and receptacles. 

Making Connections

Make connections between the portable generator’s convenience receptacles right to appliances with extension cords.

Connect a generator with a home’s electrical system by having a manual transfer switch. Never connect capability to your house by backfeeding a machine circuit for example a power range or dryer outlet. Backfeeding can kill or injure utility workers.

On job sites, a transportable generator’s neutral and ground wire be bonded (connected) for the generator to satisfy OSHA safety regulations (unless a different, approved ground is provided). Connection of an job-site generator with a home’s manual transfer switch may necessitate disabling the bond before connection to the switch. Check the owner’s manual for instructions specific to grounding the generator.

For more info go to: www.NPSBriggsandStratton